Rated voltage: ~ 220V 50Hz;
Threaded connection: DN25;
Maximum working pressure: 600mBar;
General features:
Manual opening of the valve after actuation (closing)
Coil and connector are provided with hermetic seals
DIN connector
Solenoid valves can be installed in any position without affecting their operation.
Suitable for natural gas, methane, butane, propane, non-corrosive gas.
Electrical characteristics:
Coil insulation class: H (180 ° C) (IEC 85)
Coil impregnation: impact-resistant polystyrene
Ambient temperature: -10 ° C / + 60 ° C
Degree of protection: IP65 (ISO 60529)
Electrical socket connection: DIN 46340
3-pole plug (DIN43650), cable Ø6-8 mm.
Electrical safety: IEC 335
Voltage: AC 220V (50Hz)
Supply voltage deviation + 10-15%
Operating mode: continuous;
Closing time: 30ms -1 sec;
Voltage is applied to the valve only at the moment the gas alarm is triggered;
Power consumption: no more than 20 VA;
Overall dimensions: 120x36x65mm;
Weight: no more than 0.55kg;
Compliance with standards: EN 13611: 2015, EN 60529: 2018, EN 61000-6-2: 2015, ISO 780-2001, EN 415-1: 2017, EN 14182: 2012, ISO 14617-14: 2018, IEC 60068-1 : 2015, ISO 8422: 2010